Frisco Concrete Lifting
Concrete Slab Lifting in Frisco, TX
Lift sunken driveway, patio, and walkway slabs with foam or mudjacking. Free estimates, straight answers on cost.
- 15+ Years local experience
- 500+ Projects completed
- Licensed & Insured
Serving Frisco and nearby communities.
Is it cheaper to lift a sunken slab or tear it out and pour new concrete? For most Frisco homes, lifting wins. A slab lift runs a fraction of full replacement, and it uses the existing concrete instead of hauling it to a landfill.
Frisco Concrete Lifting raises settled driveway, patio, and walkway slabs back to level using polyurethane foam or mudjacking, whichever fits the void size and soil under the slab. Fast-built subdivisions here sat on fill soil that compacts unevenly over the first few years, and that's usually why one corner of a slab drops while the rest stays put.
What's included
What's included with Concrete Slab Lifting
Typically included: Optional: Customer prep:
- Site assessment and void mapping before any drilling starts
- Injection through small (5/8" to 1") holes placed at low points
- Lift verification with a straightedge or level, not guesswork
- Hole patching to match the surrounding surface
- Joint resealing along adjacent expansion joints
- Follow-up check if settling reappears within the first season
- Clear vehicles, planters, and furniture off the slab before the crew arrives
- Note any sprinkler lines or buried utilities near the work area
Want a clearer scope?
Get a Free EstimateHow it works
How our Concrete Slab Lifting process works
Step 1Site visit
Walk the slab, mark low points, check drainage.
Step 2Void assessment
Probe depth and confirm the fill material below.
Step 3Drilling injection holes
Small holes at planned points, minutes per hole.
Step 4Foam or slurry injection
Material pumped in stages, watched closely.
Step 5Lift verification
Straightedge check confirms the slab sits level.
Step 6Hole patching
Holes filled and finished flush with the surface.
Step 7Cleanup
Jobsite swept, tools loaded, debris hauled off.
Step 8Final walk-through
Homeowner checks the result before we leave.
FAQs
Concrete Slab Lifting FAQs
Is it cheaper to raise concrete or replace it?
Raising an existing slab usually costs less than a full tear-out and repour, since you keep the concrete and skip demolition and disposal fees. Replacement makes more sense only when the slab is badly cracked or crumbling beyond a simple lift.
How long will the lift last?
A properly injected lift can hold for years. Exact lifespan depends on the soil below and how much moisture swings season to season. Clay soil that shrinks and swells can eventually cause new settling. That's normal wear, not a failed repair.
Will lifting the slab fix the crack too?
Lifting restores height and closes gaps under the slab, but it won't erase an existing crack. Cracks usually need a separate sealant or filler pass, which we can quote alongside the lift.
What does slab lifting cost in Frisco?
Costs vary by slab size, void depth, and how many injection points the job needs. A free on-site estimate gives you a real number instead of a guess.
How long does a typical lift take?
Most single-slab jobs finish in a few hours, start to walk-off, depending on size and how many low spots need filling.
Do I need a permit?
Lifting an existing slab is usually a repair, not new construction, so it typically doesn't need a permit. Always worth a quick check with your city if you're unsure.
Cost
Concrete Slab Lifting cost in Frisco
Pricing depends on slab size, how deep the void runs, and how many injection points the job needs. A free estimate gets you an exact number for your slab.
| Project type | Typical range | What’s included |
|---|---|---|
| Small patch or single low spot | $300–$800, | one or two injection points and a quick patch. |
| Standard driveway or patio section | $800–$2,500, | multi-point injection across the sunken area. |
| Larger or deeper void | $2,500–$5,000+ | , more material and more injection points to fill an uneven base. |
These are typical local ballparks — final cost depends on scope, materials, and site conditions. A free estimate gives you an accurate, itemized number for your home.
Want a number for your home?
Get a Free EstimateCodes & permits
Permits and codes for Concrete Slab Lifting
Always confirm with your city or county office before scheduling, since local rules can vary. Hebron properties in particular can fall under either Denton or Collin county depending on which side of town they sit on.
| Typically needs a permit | Often no permit |
|---|---|
| Full slab replacement or new concrete pour | Lifting and leveling an existing slab |
| — | Patching injection holes after a lift |
Need help with permits?
Get a Free EstimateDIY vs pro
DIY vs hiring a pro for Concrete Slab Lifting
| DIY | Hire a pro |
|---|---|
| Box-store foam kits exist for small hairline cracks | Injection pressure has to stay even across multiple points or one side lifts faster than the other |
| Fine for cosmetic touch-ups on a slab that isn't actually sinking | A pro reads the void depth and soil type before choosing foam or mudjacking |
| — | Uneven DIY lifts on a driveway can crack under vehicle weight |
Not sure DIY vs pro?
Get a Free EstimateBefore & after
Before and after Concrete Slab Lifting results
Before 
After
Next step
Cracked patio slab → lifted, sealed, ready for furniture again.
More services
Other Concrete Lifting services
Polyurethane Foam Leveling
Polyurethane foam leveling for sunken concrete in Frisco, TX. Fast cure, low-impact injection, free estimates available.
Driveway Leveling
Driveway leveling for sunken or cracked slabs in Frisco, TX. Foam or mudjacking rated for vehicle loads. Free estimates.
Patio & Pool Deck Repair
Patio and pool deck concrete repair in Frisco, TX. Lift settled slabs without draining the pool. Free estimates.
Ask about Concrete Slab Lifting
Tell us about the project and how to reach you.